Pulse Infrared Laser

2017-11-17 17:51:28

From 2005 to 2010, fiber laser sales are still moderate. There may be several reasons, but the most need to improve is the familiarity and comfort level. During this period, there are very few large OEMs that can offer this option, and the end user is not sure whether the fiber high power blue laser pointer technology will be really accepted or just a flash in the pan. With the gradual development of fiber lasers to the scale of today, its advantages are self-evident. When the first launch, one of the main selling points of the product is the low operating costs compared to CO2 lasers. The operating cost of fiber lasers is only a fraction of CO2 lasers and is less costly than other alternative cutting methods, mainly because fiber lasers do not require maintenance costs.

Some laser surgery, such as skin shaping and ophthalmic surgery, is called elective surgery. Some people think that the potential risk of these types of surgery may exceed the benefits they provide. For example, some healthy skin conditions may be exacerbated by laser surgery. Because as a typical surgery, the overall poor health will also increase the risk of complications. Please consult your doctor before deciding whether to undergo any laser surgery. Depending on your age, overall health status, health care plans, and laser surgery costs, your doctor may advise you to choose a traditional surgical procedure. For example, if your age is less than 18 years old, you should not accept Lasik (excimer green laser light surgery) ophthalmic surgery.

Flame cutting as the original traditional way of cutting because of its low investment, the past is not demanding on the quality of processing, when asked too much plus a machining process can be resolved, the market is very large. Plasma cutting and fine plasma cutting with flame cutting is similar to the heat affected area is too large, the accuracy is much larger than the flame cutting, the speed of the magnitude of the leap, became the main force in the plate processing. High-pressure water cutting is the use of high-speed water jet doping in the implementation of the sheet metal diamond cutting, it is almost no restrictions on the material, cutting the thickness of almost 100mm or more, the ceramic, glass and other materials when the heat is easy to burst can be cut, copper, aluminum and other high-reflective material on the laser water knife can be cut, and blue laser pointer pen cutting there is a big obstacle. The shortcomings of water cutting is the processing speed is too slow, too dirty, not environmentally friendly, consumables are higher.

In certain cases, it is necessary to remove graphite and lithium metal oxides to reveal bare copper or aluminum foil labels. The key to this step is to remove the coating material without compromising the underlying metal foil. Pulse infrared laser is best suited for this link. Similar to aluminum foil cutting, the cover film should also be cut into the desired shape with reference to the battery design. Because the isolation membrane is composed of organic compounds, pulsed ultraviolet laser is the most suitable choice.

More and more companies are starting to apply laser cutting round holes because of the flexibility and efficiency of laser processing. 500W fiber laser 303 cutting machine empty 90 meters per minute speed enough to meet a lot of sheet metal processing plant for high-speed demand, in addition, laser processing round hole section is more smooth, so it requires the process of proofing division and the perfect match with the machine, with the experience to choose the right air pressure, so that cut the hole more full.